D-linkrouter Local Setup
If you are looking for an easy method to perform the Dlink router setup, then you are in the right place. In this blog, we are going to share some important information regarding the http //dlinkrouter.local setup in an easy way.
Steps to perform D’link router setup
Follow the given points in series to complete the setup procedure:-
- Firstly, disconnect the power to the DSL internet modem.
- Join Ethernet cable to the LAN port on your D-link router.
- In the third step, attach the DSL modem to the internet port of your D-link router in order to move to the next step.
- Plugin your D-link router and modem.
- Then, you have to perform dlinkrouter.local by using the http //dlinkrouter.local.
After that, the user will reach the quick router setup wizard for the D-link router.
Well, just remember the Quick setup wizard will only appear at the first time of configuration.
Now, the question arises on how to log in to your D-link router. Keep read the below information.
Steps to perform the D-link router login
One can easily log in to your D-link router with the help of following points:-
- Use the secure web browser of your choice. Enter http //dlinkrouter.local in the address field to log in to your router. If the above-mentioned web address fails, then use 192.168.1.1 IP address.
- Put the username as admin and for the password field (left it as blank).
- Click on the OK or Login button to finish the Login process.
Therefore, from the defined steps, it becomes easy for the users to log in to the D-link router and to configure the setting of your D-link router very easily.
Now, we are going to discuss, how to change the D-link router password?
Before starting the procedure, it is necessary to understand why it is important to change the password. So, to secure the Network as well as to reduce the privacy risks, the users are needed to change the password at regular intervals.
Steps to http //dlinkrouter.local change password
The following steps are:-
- Explore any of the web browsers. Provide http //dlinkrouter.local or you may enter the default internet protocol address.
- Once, the D’link router admin page gets open. Then, mention the username and password in the given text fields.
- Go to the wireless tab displayed at the top of the page.
- Select wireless security mode.
- Now, you have to enable the WPA 2 option from the wireless security mode.
- Tap on the passphrase field and start entering the new password.
- To confirm the Passphrase field, you have to re-enter the password.
- Finally, tap on the save setting.