dlink dir 615 wireless router setup

How To Setup Dlink Dir 615 Wireless Router?

The DLink Dir 615 a high performance wireless network which provides hassle free internet. Notice that your router may look a bit different depending on when and where you bought it. If you bought a newly D’Link Dir 615 wireless router and you are looking for setup, Follow the step by step guide below.

Steps For Dlink Dir 615 Wireless Router Hardware Setup

  • To set it up, just plug it in and connect the cable from your cable modem or DSL broader to the Port marked Internet.
  • The power Led on the front will turn Orange than green. 
  • There’s another Led that shows when your Internet link is active, it will blink green if your connection is live or Orange.
  • If there’s a problem, a third Led that looks like Waves links green if the router is emitting a wireless signal. 
  • Software setup is easy. Connect your PC to one of the high speed Ethernet ports on the back of the Dir 615.
  •  If possible, use the same computer that was originally connected to your cable modem or DSL router.
  • You can also connect to the wireless network created by the Dir 615. 
  • The default name or S-S-I-D. 
  • After everything’s connected, turn off your cable or DSL modem. Wait a moment and turn it back on. 

In many cases, your Internet connection will work automatically, and you can skip right to setting up your wireless network. Otherwise, you’ll need to configure the Internet connection yourself.

Steps For Dlink Dir 615 Wireless Router Configuration Setup

  • After you connect, open a browser type https. 192.168.0.1 or dlinkrouter.local in the address bar. 
  • Click Go to configure your router, you’ll need to provide the administrator password. 
  • The first time you log into your router, the password will be blank. 
  • You can set up your Internet connection using the Handy Internet Connection Setup Wizard, or enter your settings manually.
  •  Let’s go through the steps using the wizard. First, enter a new administrator password.
  •  You’ll need to provide this to change router settings in the future. Note that this is not the same as the way of doing this,You’ll enter that later. 
  • Next, choose your Time zone. 
  • Now you’ll need to configure your Internet connection. 
  • This step varies depending on how you connect.
  • Select your internet provider and follow the instructions on the screen to finish setting up your connection, call your ISP if you have any problems.
  • If you use a cable modem, you probably have a DHCP connection. Choose that option and click next. 
  • You won’t usually need to change any settings on the screen, so click Next to continue the setup process.
  • If you do have any problems, your ISP can help. If you use DSL, you most likely have a Pppoe connection, but again, you’ll want to double check that with your ISP. 
  • Choose the option and click next. You’ll need to enter a username and password, as well as several other items.
  •  You should have received this information from your ISP when you signed up for service.
  • Click Next on the following screen, click Connect to save your settings. 
  • Wait a moment while your router reboots. 
  • After it’s done, your Internet connection will be ready. 
  • Now it’s time to configure your wireless network. 
  • Start your browser again and go back to 192.168.0.1.
  •  If you set an administrator password before you’ll have to provide it to log in. 
  • Now, select wireless Settings on the left and then choose Wireless Network Setup Wizard on the next page, enter a network name for SSID.
  • Next, choose manually to assign a network key that’s just your wireless security password.
  • This is the one you need to connect to the wireless network.
  •  Assigning it manually means you can choose one yourself. Otherwise, the router can create one for you. 
  • Finally, click the box that says Use WPA encryption. It’s more secure, and it works with almost all modern computers, tablets, and smartphones. 
  • After that, click Next. 
  • Now it’s time to enter your wireless security password. 
  • You’ll have to provide this the first time you connect to the router.
  • Please note it should be different from the administrator password that you set when you configured your Internet connection earlier. 
  • The security password must be at least eight characters long. It can include both letters and numbers.
  • When finished, click Next. 
  • Review your settings and then click Save. 
  • Wait a few moments while your router reboots after it does, your high speed wireless and network will be ready to use.
  • Just press and hold the reset button on the back of the Dir 615 until the Led is on the front. 
  • Change this returns your router to its original factory settings, and you can restart setup from the beginning to connect a mobile device.
  •  Just choose your wireless network and enter your password. For more information, visit dlink.com.

Leave a Comment

Your email address will not be published. Required fields are marked *