How To Setup Dir 825 D’Link AC 1200 Wifi Gigabit Router?

So you are looking to setup your Dir 825 D’Link 1200 Wifi Gigabit Router.

Let’s not waste the time and follow the step-by-step guide to setup your router easily.

Steps To Setup Dir 825 D’Link 1200 Wifi Gigabit Router

  • Take the power cable.
  • Insert it in the power port.
  • The other end will go in the electric socket.
  • Plug in your internet service provider cable in the WPS port.
  • Insert the ethernet cable in any of the ethernet ports.
  • The other end of the ethernet cable will be inserted in the laptop or computer.
  • Power on your router.
  • Check all the leds blinking.
  • Open the web browser.
  • Type the IP address
  • On the setup wizard page click on the start button.
  • Select the language.
  • Click Yes, then click continue.
  • This device will be setup as a router as well as repeater.
  • Select the connection type as wired connection.
  • Select the work mode as router.
  • Click Next.
  • Select your internet connection type.
  • Select PPPOE or the internet service provider you are using.
  • Enter the username and password provided by the internet service provider.
  • You can enter the service name if provided by your internet service provider.
  • Click on next.
  • Set the network name and password.
  • Click on next for next two pages without entering anything.
  • Set your interface password.
  • Click on next.
  • You will be redirected to the summary page, making sure all the details are accurate.
  • Click on apply.
  • Once all the settings are applied, go to your wifi section.
  • Connect with newly found wifi connection.
  • Enter the password you have set previously.
  • Once you have connected go ahead and click next.
  • Now you see connection to the internet is configured and ready to use.
  • Click on finish.
  • For making sure to go to dlinkrouter.local.
  • Go to the summary page and see the status is green.

Open any website in the browser, you will see the website is running which means your router setup successfully completed now.

Steps To Configure This Device As Wifi Repeater

  • Open browser again.
  • Enter the IP address again
  • So you will be guided to the beginning page of the wizard.
  • Before we go ahead, if you want to use this device as a repeater.
  • Keep it updated to the latest firmware.
  • Click on start.
  • Select your language as english.
  • Click on continue.
  • This is where things changed, since we are setting up as wifi repeaters.
  • We have to select Wifi as a connection method.
  • In the work mode option we have to go down and select a repeater.
  • Click Next.
  • So you will get this page where you have to set your IP address.
  • Setup your IP address manually, you can use the IP address to manage your repeater settings later.
  • So It is very easy to find the IP address of your main router.
  • If you are using a Windows computer, you can go to the command prompt.
  • Type IP config, you will get the IP of your main connection.
  • If you are on mac computer

Leave a Comment

Your email address will not be published. Required fields are marked *