Blog - D-Link

The firmware update is an essential part of the router. An updated firmware of the router gives excellent performance and more reliable Wi-Fi coverage to your home wireless network. Besides, it also fixes bugs and improves the router function. You can update the dlinkrouter.local firmware using two ways. One way is automatic firmware, and the other is the manual firmware update. Let see both the firmware update method.

Automatic Firmware Update

First, download the latest version of the firmware for your router from the D-link center.
Next, launch your favorite internet browser on your computer or laptop.
Access the D-link router web setup page using the dlinkrouter.local web address.
Now, the web page will take you to the D-link login page.
Here, provide the D-link router login credentials-username and password.
Type admin as the default username and left the password section blank.
After this, the router web GUI screen will open.
Tap on the Management option and then update
Meanwhile, the firmware update screen will display.
Press the Check for New Firmware
It will automatically check the firmware update.
Hit the Ok button if any new firmware update is available.
Finally, you completed the automatic firmware update process.

Manual Firmware Update

If you want to update your router’s firmware manually, then carefully proceed with these mention steps.

In the first step, move to your computer and open any preferred web browser.
Then, you have to download the latest firmware of the router from the D-link download site.
Save the downloaded firmware file on your computer desktop.
Again launch the internet browser and enter dlinkrouter.local in the address bar.
A login screen will be pop up and prompt for the default login credentials.
Mention admin in the default username box and leave the password option blank.
Click the Enter key, and a new screen will open up.
Head over to the Tools tab on the top corner side of your device window screen.
On the left corner hit the Firmware tab.
Further, press the Browse option under the Firmware upgrade section.
Hereafter, tap the upload button to upload the downloaded firmware file.
Tap the Continue to proceed further.

How to reset the D-link router?

When you forget your D-link router login password, then you need to reset your router. Resetting of the router also fixes the technical issue of your router. Additionally, you can reset your D-link router within a few seconds. Follow the given steps to reset your router.

Foremost, locate the reset button on the rear of your router.
Use a paper clip or similar object to press the reset button.
Press and hold the reset button.
Release the reset button after 15 seconds.
Now the D-link router will reboot automatically.
At last, your router reset process complete.

D-linkrouter Local Setup

If you are looking for an easy method to perform the Dlink router setup, then you are in the right place. In this blog, we are going to share some important information regarding the http //dlinkrouter.local setup in an easy way.

Steps to perform D’link router setup

Follow the given points in series to complete the setup procedure:-

Firstly, disconnect the power to the DSL internet modem.
Join Ethernet cable to the LAN port on your D-link router.
In the third step, attach the DSL modem to the internet port of your D-link router in order to move to the next step.
Plugin your D-link router and modem.
Then, you have to perform dlinkrouter.local by using the http //dlinkrouter.local.

After that, the user will reach the quick router setup wizard for the D-link router.

Well, just remember the Quick setup wizard will only appear at the first time of configuration.

Now, the question arises on how to log in to your D-link router. Keep read the below information.

Steps to perform the D-link router login

One can easily log in to your D-link router with the help of following points:-

Use the secure web browser of your choice. Enter http //dlinkrouter.local in the address field to log in to your router. If the above-mentioned web address fails, then use 192.168.1.1 IP address.
Put the username as admin and for the password field (left it as blank).
Click on the OK or Login button to finish the Login process.

Therefore, from the defined steps, it becomes easy for the users to log in to the D-link router and to configure the setting of your D-link router very easily.

Now, we are going to discuss, how to change the D-link router password?

Before starting the procedure, it is necessary to understand why it is important to change the password. So, to secure the Network as well as to reduce the privacy risks, the users are needed to change the password at regular intervals.

Steps to http //dlinkrouter.local change password

The following steps are:-

Explore any of the web browsers. Provide http //dlinkrouter.local or you may enter the default internet protocol address.
Once, the D’link router admin page gets open. Then, mention the username and password in the given text fields.
Go to the wireless tab displayed at the top of the page.
Select wireless security mode.
Now, you have to enable the WPA 2 option from the wireless security mode.
Tap on the passphrase field and start entering the new password.
To confirm the Passphrase field, you have to re-enter the password.
Finally, tap on the save setting.